ProForm 490 Spx Bike English Manual - Page 13

HOW TO ADJUST THE PEDALING RESISTANCE HOW TO MAINTAIN THE EXERCISE BIKE To increase the resis- tance of the pedals, turn the resistance knob clockwise; Resistance Knob to decrease the resistance, turn the resistance knob Brake Lever counterclockwise. To stop the flywheel, push the brake lever downward. The flywheel should quickly come to a complete stop. IMPORTANT: When the exercise bike is not in use, tighten the resistance knob completely. HOW TO LEVEL THE EXERCISE BIKE If the exercise bike rocks slightly on your floor during use, turn one or both of the leveling feet on the front or rear stabilizer (see the drawing on page 5) until the rocking motion is eliminated. Inspect and tighten all parts of the exercise bike regularly. Replace any worn parts immediately. To clean the exercise bike, use a damp cloth and a small amount of mild detergent. IMPORTANT: To avoid damage to the console, keep liquids away from the console and keep the console out of direct sunlight. HOW TO ADJUST THE REED SWITCH If the console does not display correct feedback, the reed switch should be adjusted. To adjust the reed switch, see the drawing in assembly step 14 on page 11. Rotate the flywheel until the magnet is aligned with the reed switch. Slide the reed switch slightly toward or away from the magnet. Then, rotate the flywheel for a moment. Repeat these actions until the console displays correct feedback. 13