ProForm 5.0 Zlt Instruction Manual - Page 7
ASSEMBLY, Rotate the Right and Left Rear Feet 52
View all ProForm 5.0 Zlt manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
ASSEMBLY • Assembly requires two persons. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you finish all assembly steps. • After shipping, there may be an oily substance on the exterior of the treadmill. This is normal. If there is an oily substance on the treadmill, wipe it off with a soft cloth and a mild, non-abrasive cleaner. • Left parts are marked "L" or "Left" and right parts are marked "R" or "Right." • To identify small parts, see page 6. • Assembly requires the following tools: the included hex keys one adjustable wrenche To avoid damaging parts, do not use power tools. 1. Go to www.iconsupport.eu on your computer and register your product. 1 • activates your warranty • saves you time if you ever need to contact Customer Service • allows us to notify you of upgrades and offers Note: If you do not have Internet access, call Customer Service (see the front cover of this manual) and register your product. 2. Make sure that the power cord is unplugged. 2 Rotate the Right and Left Rear Feet (52, 53) down from the shipping position. IMPORTANT: Do not use the treadmill with the Rear Feet (52, 53) in the shipping position. With the help of a second person, carefully raise the Left and Right Uprights (73, 102) to the vertical position. Make sure not to pinch any wires. 73 102 53 52 7