ProForm 5.0 English Manual - Page 7
Endcap Screw 14 into the Front Endcap
View all ProForm 5.0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
2. With the help of a second person, carefully tip the treadmill onto its right side. Insert the other Extension Leg (89) into the base of the left Upright (84). Hold an Extension Leg Nut (67) in the bottom of the Extension Leg, and finger tighten a 2 1/4" Extension Leg Bolt (92) into the top of the Extension Leg. Next, finger tighten a 2 1/2" Extension Leg Bolt (65) into the bottom of the Extension Leg. Firmly tighten the Extension Leg Bolts. Slide the other Front Endcap (44) onto the base of the left Upright (84). Partially tighten a Front Endcap Screw (14) into the Front Endcap and the base. 2 44 14 84 92 89 65 67 3. Attach two Base Pads (82) to the base of the Uprights (84) with two 1" Tek Screws (83). 3 83 82 84 83 82 4. With the help of a second person, carefully raise 4 the treadmill to the vertical position. Insert the two Handrails (20) into the tubes at the tops of the Uprights (84). Turn the Handrails so that the Handrail Bolts (64) can be threaded 20 into the Handrails (see the inset drawing). Start both Handrail Bolts before tightening either one. See steps 1 and 2. Fully tighten the two Front Endcap Screws (14) (not shown). 20 64 84 20 64 7