ProForm 500i Treadmill User Manual - Page 22

THE INFORMATION MODE/DEMO MODE The console features an information mode that keeps track of treadmill usage information and allows you to select a system of measurement. To select the information mode, insert the key into the console while holding down the Stop button, and then release the Stop button. When the information mode is selected, the following information will be shown: from the console, and the display will remain lit; the buttons will not operate. If a "d" appears when the information mode is selected, press the Speed decrease button so the "d" disappears. The upper left corner of the display will show the total number of hours that the treadmill has been used. An "E" (for English) or an "M" (for metric) will appear in the lower right corner of the display. Press the Speed increase button to change the unit of measurement, if desired. Important: If a "d" appears in the display, the console is in the "demo" mode. This mode is intended to be used only when a treadmill is displayed in a store. When the console is in the demo mode, the power cord can be plugged in, the key can be removed The lower left corner of the display will show the total number of miles or kilometers that the walking belt has moved. To exit the information mode, remove the key from the console. 22