ProForm 510 Uk Manual - Page 13

The Walking Belt Slows When Walked

Get ProForm 510 PDF manuals and user guides View all ProForm 510 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

PROBLEM: THE WALKING BELT SLOWS WHEN WALKED ON SOLUTION: a. If an extension cord is needed, use only a 1 mm2 (14-gauge) cord of 1,5 m (5 ft.) or less in length. b. If the walking belt still slows when walked on, please call our Customer Service Department. PROBLEM: THE WALKING BELT IS OFF-CENTRE SOLUTION: a. If the walking belt has shifted to the left, first remove the key and UNPLUG THE POWER CORD. Using the a allen wrench, turn the rear roller adjustment bolt clock- wise 1/4 of a turn. Plug in the power cord, insert the key and run the treadmill for a few minutes. Repeat until the walking belt is centred. b. If the walking belt has shifted to the right, first remove the key and UNPLUG THE POWER CORD. b Using the allen wrench, turn the rear roller adjustment bolt counterclockwise 1/4 of a turn. Plug in the power cord, insert the key and run the treadmill for a few min- utes. Repeat until the walking belt is centred. 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
13
PROBLEM:
THE WALKING BELT SLOWS WHEN WALKED ON
SOLUTION:
a. If an extension cord is needed, use only a 1 mm
2
(14-gauge) cord of 1,5 m (5 ft.) or less in
length.
b. If the walking belt still slows when walked on, please call our Customer Service Department.
PROBLEM:
THE WALKING BELT IS OFF-CENTRE
SOLUTION:
a.
If the walking belt has shifted to the left,
first remove
the key and
UNPLUG THE POWER CORD
. Using the
allen wrench, turn the rear roller adjustment bolt clock-
wise 1/4 of a turn. Plug in the power cord, insert the key
and run the treadmill for a few minutes. Repeat until the
walking belt is centred.
b.
If the walking belt has shifted to the right,
first
remove the key and
UNPLUG THE POWER CORD
.
Using the allen wrench, turn the rear roller adjustment
bolt counterclockwise 1/4 of a turn. Plug in the power
cord, insert the key and run the treadmill for a few min-
utes. Repeat until the walking belt is centred.
a
b