ProForm 510e Uk Manual - Page 5

ASSEMBLY Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the following tools: the included allen wrench, a phillips screwdriver , an adjustable spanner , a rubber mallet , and pliers . As you assemble the elliptical exerciser, use the drawings below to identify the small parts used in assembly. The number in parentheses below each drawing refers to the key number of the part, from the PART LIST on page 18. The second number refers to the quantity used in assembly. Note: Some small parts may have been pre-attached for shipping. If a part is not in the parts bag, check to see if it has been pre-attached. If assistance is needed, call 0345-089009. M6 Nylon Locknut (17)-2 M10 Nylon Locknut (29)-6 M4 x 19mm Flange Screw (16)-6 M4 x 16mm Screw (34)-5 M6 x 16mm Button Head Bolt (54)-2 M10 x 25mm Button Head Screw (42)-2 M10 x 45mm Button Head Bolt (59)-2 Handlebar Spacer (39)-2 Pedal Arm Spacer (41)-2* 3/4" Axle Cap (43)-4* 5/8" Axle Cap (57)-2* Weld Spacer (49)-2 5