ProForm 535 Uk Manual - Page 6

3. Insert one of the Handrails (1) into the tube at the upper 3 end of the right Upright (11). Make sure that the flat part of the Handrail is on top. 11 1 4. Align the hole in the Handrail (1) with the hole in the 4 Upright (11). Using the allen wrench, tighten a Handrail Screw (53) into the Upright and the Handrail. Attach the other Handrail to the left Upright (not shown) as described above. 5. Attach the Storage Latch (14) to the left Upright (11) with two Latch Screws (35). Be careful not to overtighten 5 the Latch Screws. 1 11 53 Bottom View 11 35 14 6. Make sure that all parts are tightened before you use the treadmill. Keep the included allen wrench in a secure place. The allen wrench is used to adjust the walking belt (see page 13). To protect the floor or carpet, place a mat under the treadmill. 6