ProForm 545 Uk Manual - Page 5
Assembly, Warning - s treadmill
View all ProForm 545 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
ASSEMBLY Assembly requires two persons. Set the treadmill in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench and your own phillips screwdriver , adjustable spanner , needlenose pliers , and wire cutters . Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner. Washer (39)-2 Handrail Bolt (91)-2 Screw (79)-6 Extension Leg Handrail Nut (93)-2 Handrail Washer (92)-2 Screw (53)-2 Short Handrail Bolt (89)-2 WARNING: Do not plug in the power 1 cord until the treadmill is completely assembled. 1. With the help of a second person, carefully raise the 11 Uprights (11) until the treadmill is in the position shown. 2. Insert one of the Extension Legs (34) into the treadmill 2 as shown. (Note: It may be helpful to tip the Uprights [11] in the direction shown by the arrow as you insert the Extension Leg.) Make sure that the Base Pad (40) is on the indicated side of the Extension Leg. Attach the Extension Leg with an Extension Leg Screw (53). Make sure to push on the head of the Extension Leg Screw whilst tightening it. Attach the other Extension Leg (not shown) in the same way. 5 11 53 34 40