ProForm 6.0 Es Bike English Manual - Page 7
the Main Wire 76 and the Frame Pulse
View all ProForm 6.0 Es Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
3. Slide the Shield Cover (5) upward onto the Upright (4). 3 Have a second person hold the Shield Cover (5) around the Upright (4) until you complete step 4. Tip: Avoid pinching the wires inside the Frame (1). Slide the Upright (4) onto the Frame. Attach the Upright (4) with five M8 x 16mm Screws (60) and five M8 Split Washers (61). Avoid pinching 5 the wires 4 60 61 61 60 61 60 1 4. Locate the wire tie inside the Upright (4). Then, locate the Main Wire (76) and the Frame Pulse 4 Wire (75) inside the Frame (1). Tie the lower end of the wire tie to the ends of the Main Wire (76) and the Frame Pulse Wire (75). Then, pull the other end of the wire tie upward until the Main Wire (76) and the Frame Pulse Wire (75) are routed through the Upright (4). Then, slide the Shield Cover (5) downward and press it onto the Right and Left Front Shields (21, 22). Wire Tie 5 Wire Tie 75 4 76 1 22 21 7