ProForm 620 Zlt Treadmill Uk Manual - Page 13

13. Attach the Latch Bracket (99) on the end of the Storage Latch (97) to the Base (74) with two 3/8" 13 x 2" Bolts (67) and two 3/8" Nuts (98). 74 98 97 99 67 14. Attach the upper end of the Storage Latch (97) to the Latch Crossbar (91) with a 3/8" x 1 3/4" 14 Bolt (68) and a 3/8" Nut (98). Move the treadmill to the desired location for use if you have not already done so (see HOW TO FOLD AND MOVE THE TREADMILL on page 22). Lower the Frame (38) (see HOW TO LOWER THE TREADMILL FOR USE on page 22). 91 98 68 38 97 15. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. Note: Extra hardware may be included. Keep the included hex keys in a secure place; one of the hex keys is used to adjust the walking belt (see pages 24 and 25). If you purchase the optional chest heart rate monitor (see page 21), follow the steps below to install the receiver included with the chest heart rate monitor. 1. Make sure that the power cord is unplugged. 1 Remove the indicated #8 x 3/4" Screw (4) and the Access Door (80) from the underside of the Console Base (58). 58 13 80 4