ProForm 620 Zlt Treadmill Uk Manual - Page 14
Bdanger: Aoperation And Adjustment - australia
View all ProForm 620 Zlt Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
2. See the inset drawing. Hold the receiver (A) so that the antenna (B) is oriented as shown. Peel the paper backing off the pad on the bottom of the receiver. Press the receiver onto the Access Door (80) as shown. Connect the wire on the receiver to the indicated wire extending from the Console Base (58). Make sure that no wires are pinched. Reattach the Access Door (80) with the #8 x 3/4" Screw (4). Discard the other wires included with the receiver. 2 80 UK 58 Wires A B 80 4 SP OPERATION AND ADJUSTMENT HOW TO PLUG IN THE POWER CORD This product must be earthed. If it should malfunction or break down, earthing provides a path of least resistance for electric current to reduce the risk of electric shock. This product's power cord has an equipment-earthing conductor and an earthing plug. IMPORTANT: If the power cord is damaged, it must be replaced with a manufacturer-recommended power cord. Follow the steps below to plug in the power cord. 1. Plug the indicated end of the power cord into the socket on the treadmill. Socket on Treadmill AUS DANGER: Improper connection of the equipment-earthing conductor can result in an increased risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly earthed. Do not modify the plug provided with the product-if it will not fit the outlet, have a proper outlet installed by a qualified electrician. GR Power Cord 2. Plug the power cord into an appropriate outlet that is properly installed and earthed in accordance with all local codes and ordinances. UK Outlet Australia Outlet UK FR/SP 14