ProForm 690 Lt Treadmill English Manual - Page 7
Do not, overtighten the Nut; the Wheel must turn, freely., Make sure that the power cord is
View all ProForm 690 Lt Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
1. Make sure that the power cord is unplugged. 1 With the help of a second person, carefully tip the treadmill onto its left side. Partially fold the Frame (52) so that the treadmill is more stable; do not fully fold the Frame yet. Remove and discard the two indicated bolts (A) and the shipping bracket (B). B 87 Cut the shipping tie securing the Wire Harness (87) to the Base (84). Locate a plastic tie in the indicated hole in the Base, and use the plastic tie to pull the Wire Harness out of the hole. Attach two Base Feet (86) to the Base (84) in the locations shown with two #8 x 1" Tek Screws (1) and two Base Foot Spacers (83). 83 52 86 1 Then, attach the other two Base Feet (86) with two #8 x 1" Tek Screws (1). A Hole 86 1 84 86 1 2. Attach a Wheel (85) to the Base (84) with a 3/8" x 2" Bolt (6) and a 3/8" Nut (7). Do not overtighten the Nut; the Wheel must turn freely. 86 83 1 2 Plastic Tie 6 84 85 7 7