ProForm 7.5c Owners Manual - Page 7
Dist., ON/OFF
View all ProForm 7.5c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
DISTANCE-Displays the total distance you have pedaled, in miles. CALORIE-Displays the total number of Calories you have burned. Note: If the pedaling resistance is near the lowest or highest setting, the actual number of Calories you have burned will be slightly lower or higher than the number displayed. SCAN-Displays the SPEED, TIME, DISTANCE and CALORIE modes in a repeating cycle. ELECTRONIC MONITOR DIAGRAM 1. LCD display-Display for all modes. 2. Mode indicator-Shows which mode is currently selected. 3. Mode button-Selects modes. 4. On/off button-Turns the power on and off, and resets the display. 2 3 MODE -nn SON LIL :00 Time Dist. Cal. Scan 4 ON/OFF ELECTRONIC MONITOR OPERATION Note: The electronic monitor requires two "AA" size batteries (not included). See assembly step 6 on page 5 for battery installation instructions. 1. To turn on the power, press the on/off button or simply begin pedaling. 2. Select one of the five modes: A. SCAN-When the power is turned on, the SCAN mode will be selected automatically. A mode indicator will appear by the word "SCAN." The SPEED, TIME, DISTANCE and CALORIE modes will all be displayed, for five seconds each, in a repeating cycle. A second mode indicator will show which mode is currently displayed. B. SPEED, TIME, DISTANCE or CALORIE-The SPEED, TIME, DISTANCE or CALORIE mode can be selected for continuous display by repeatedly pressing the mode button. The modes will be selected in the following order: SPEED, TIME, DISTANCE, CALORIE, SCAN. 3. To reset the LCD display, turn the power off and then on again by pressing the on/off button twice. 4. When you are finished exercising, press the on/off button to turn off the power. Note: If the pedals are not turned and the electronic monitor buttons are not pressed for four minutes, the power will turn off automatically to conserve the batteries. ELECTRONIC MONITOR CARE Keep the electronic monitor out of direct sunlight, or the LCD display may be damaged. Clean the monitor periodically using a soft, dry cloth. Do not allow liquids to come in contact with the monitor. 7