ProForm 710 Ekg Exercise Bike Uk Manual - Page 4

ASSEMBLY Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included tools and your own adjustable wrench screwdriver . and Phillips Use the part drawings below to identify the small parts used in assembly. The number in parentheses below each drawing refers to the key number of the part, from the PART LIST on page 18. The second number refers to the quantity needed for assembly. Note: Some small parts may have been preattached for shipping. If a part is not in the parts bag, check to see if it has been preattached. M4 x 15mm M4 x 15mm M6 x 8mm M8 Nylon M8 Split M10 Split Screw (15)-2 Screw (40)-4 Screw (51)-2 Locknut (37)-4 Washer (36)-4 Washer (34)-7 M10 x 20mm Button Screw (35)-3 M10 x 73mm Button Screw (33)-4 1. Identify the Front Stabilizer (2), which has round wheels. While another person lifts the front of the 1 Frame (1), attach the Front Stabilizer to the Frame with two M10 x 73mm Button Screws (33) and two M10 Split Washers (34). 1 2 34 34 33 4