ProForm 940 Ce Elliptical English Manual - Page 8
Attach the Front Stabilizer 2 to the Frame
View all ProForm 940 Ce Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
3. With the help of another person, place two pack- ing inserts from the packing material under the 3 Frame (1) so that the Frame is lifted off the floor. Have another person hold the elliptical to prevent it from moving from side to side until this step is completed. Attach the Front Stabilizer (2) to the Frame (1) with four 5/16" x 2 1/2" Screws (88). Then, remove the packing inserts and lower the Front Stabilizer. 4. Tip: Be careful not to pinch the Wire Harnesses (97, 54) during this step. Start all 4 screws before tightening any of them. While a second person holds the Upright (6) near the Frame (1), connect the Upper Wire Harness (97) to the Lower Wire Harness (54). Attach the Upright (6) to the Frame (1) with five 5/16" x 1" Screws (81) and five 5/16" Split Washers (105). 6 81 105 81 1 2 88 88 Avoid pinching the Wire Harnesses (97, 54) 97 54 1 105 81 8