ProForm 960 English Manual - Page 10

14. Insert a 2" Round Inner Cap (101) into the end of a Butterfly Arm (10). Attach a Butterfly Handle (53) to the Butterfly Arm (10) with two 3/8" x 1" Bolts (84) and two 3/8" Washers (48). Repeat this step with the other Butterfly Arm (10). 15. Lubricate a 3/8" x 3 1/4" Bolt (62). Attach the left Butterfly Arm (10) to the Left Pivot Arm (71) with the Bolt and a 3/8" Nylon Locknut (50). Repeat this step with the right Butterfly Arm (not shown) and the Right Pivot Arm (85). 14 10 53 15 10 48 53 48 84 101 48 48 101 50 10 85 71 62 Lubricate 16. Lubricate a 1/2" x 4" Bolt (68). Attach the Press 16 Frame (8) to the Press Base (6) with the Bolt and a 1/2" Nylon Jamnut (36). Note: Do not over tighten the 1/2" Nylon Jamnut; the Press Frame must be able to pivot easily. 17. Insert a 2" Round Inner Cap (101) into the top of a 17 Press Arm (77). Press two 1" Round Inner Caps (86) into the outside ends of the handles. Attach the Press Arm (77) to the Press Frame (8) with two 5/16" x 2 3/4" Bolts (96) and two 5/16" Nylon Locknuts (64). Repeat this step with the other Press Arm (77). 8 68 6 36 Lubricate 101 Handles 86 64 96 77 8 10