ProForm 960 English Manual - Page 15

34. Wrap the Weight Cable (72) around a 3 1/2" Pulley 34 (24). Attach the Pulley and a Cable Trap (25) to the 1 Butterfly Upright (1) with a 3/8" x 4 3/4" Bolt (60), a 3/8" Washer (48), and a 3/8" Nylon Jamnut (63). Be 60 sure that the Cable Trap is turned to hold the Cable in place. 48 63 24 25 72 35. Wrap the Weight Cable (72) around a 3 1/2" Pulley 35 73 (24). Attach the Pulley and a Cable Trap (25) between the lowest holes of the Adjustable Pulley 54 Plates (23) hanging from the Butterfly Cable (73) with a 3/8" x 2" Bolt (54) and a 3/8" Nylon Locknut (50). Be sure that the Cable Trap is turned to hold the Cable in place. 25 24 72 23 50 36. Wrap the Weight Cable (72) around a 3 1/2" Pulley 36 (24). Attach the Pulley and a Cable Trap (25) to the bracket on the Butterfly Base (4) with a 3/8" x 1 3/4" Bolt (57) and a 3/8" Nylon Jamnut (63). Be sure that the Cable Trap is turned to hold the Cable in place. 37. Note: For convenience, the weights assembled 37 in step 8 are not shown in the following draw- ings. Wrap the Weight Cable (72) around a 3 1/2" Pulley (24). Attach the Pulley and a Cable Trap (25) to the bracket on the Butterfly Base (4) with a 3/8" x 1 3/4" Bolt (57) and a 3/8" Nylon Jamnut (63). Be sure that the Cable Trap is turned to hold the Cable in place. Bracket 25 57 24 72 63 4 72 25 57 63 24 Bracket 4 15