ProForm 960 English Manual - Page 16

38. Wrap the Weight Cable (72) around a 3 1/2" Pulley 38 (24). Attach the Pulley and a Cable Trap (25) between the lowest holes in the Adjustable Pulley Plates (23) hanging from the Ab Cable (47) with a 3/8" x 2" Bolt (54) and a 3/8" Nylon Locknut (50). Be sure that the Cable Trap is turned to hold the Cable in place. 54 25 47 23 50 24 72 39. Remove the preassembled 3/8" x 1 3/4" Bolts (57) 39 from the Small Pulley Plates (22). Wrap the Weight Cable (72) around a 3 1/2" Pulley (24). Attach the Pulley between two Small Pulley Plates (22) with a 3/8" x 1 3/4" Bolt (57) and a 3/8" Nylon Locknut (50). 24 50 72 57 22 40. Wrap the Weight Cable (72) around a 4 1/2" Pulley 40 (82) in the direction shown. Attach the Pulley to the bracket on the Press Top Frame (9) with a 3/8" x 2" Bolt (54) and a 3/8" Nylon Locknut (50). 54 82 9 72 50 Bracket 41. Place a 1/2" Washer (11) on top of the Weight Tube 41 (17). Thread a 1/2" Plain Nut (100) halfway onto the bolt 72 on the Weight Cable (72). Screw the bolt on the Weight Cable into the Weight Tube (17) a couple of 100 turns. 11 Tighten the 1/2" Plain Nut (100) down onto the 1/2" 17 Washer (11). 16