ProForm 990 Cse Elliptical English Manual - Page 11

9. Identify the Right Upper Body Arm (8), which 9 is marked with a “"Right”" sticker, and orient it as shown. Have a second person hold the Right Upper 9 Body Arm (8) near the Right Upper Body Leg (6). Locate the wire tie in the right side of the Upright (5). Tie the wire tie to the Right Grip Wire (45). Pull the upper end of the wire tie until the Right Grip Wire is routed through the Upright. Tip: To prevent the Right Grip Wire (45) from falling into the Upright (5), secure the Right Grip Wire with the wire tie. Tip: Avoid pinching the Right Grip Wire (45). Attach the Right Upper Body Arm (8) to the Right Upper Body Leg (6) with three M8 x 16mm Screws (102). Attach the Left Upper Body Arm (9) to the Left Upper Body Leg (7) in the same way. Avoid pinching the Right Grip Wire (45) 5 7 Wire Tie 6 8 102 45 102 10. Untie and discard the wire ties on the wires in the Upright (5). Have a second person hold the Console (33) near the Upright (5). Connect the wires on the Console (33) to the Pulse Wire (105), the Wire Harness (60), and the Grip Wires (45, 104). Make sure to connect the console wire that has a tag to the Grip Wire that has a tag. Insert the Pulse Wire (105) upward into the Console (33). Insert the other wires downward into the Upright (5). Tip: Avoid pinching the wires. Attach the Console (33) to the Upright (5) with four M4 x 16mm Screws (106). See step 3. Tighten the four M8 x 16mm Screws (102). Then, slide the Top Cover (27) downward and press it onto the Frame Covers (21, 22). 10 33 Avoid pinching the wires 60 105 104 106 45 5 11