ProForm C830 Elliptical English Manual - Page 12
How To Use The Manual Mode
View all ProForm C830 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
HOW TO USE THE MANUAL MODE 1 Turn on the console. Make sure that the power cord is properly plugged in (see HOW TO PLUG IN THE POWER CORD on page 10). To turn on the console, press the On/Reset button or begin pedaling. (See the drawing on page 11 to identify the On/Reset button.) 2 Select the manual mode. Each time the console is turned on, the manual mode will be selected. If a program has been selected, select the manual mode by pressing the Program button repeatedly until the letters RPM appear in the small display. 3 Begin pedaling and change the resistance of the pedals and the angle of the ramp as desired. As you pedal, change the resistance of the pedals by pressing the Resistance buttons below the large display. There are ten resistance levels- level 10 is the most challenging. Note: After the buttons are pressed, it will take a few seconds for the resistance to reach the selected setting. To vary the feel of your exercise on the elliptical crosstrainer, increase or decrease the angle of the ramp by pressing the Ramp buttons below the large display. 4 Follow your progress with the small display and the large display. The small display will show your pedaling pace, in revolutions per minute (RPM). The indicator bar in the small display will increase or decrease in length as you increase or decrease your pedaling pace. Indicator Bar The upper section of the large display will show the distance you have pedaled and the numbers of calories and fat calories you have burned (see FAT BURNING on page 21 for an explanation of fat calories). The display will change from one number to the next every few seconds. If you use the handgrip pulse sensor, the display will also show your heart rate (see step 5 on page 13). To view only the distance you have pedaled or the Upper Button number of calories or fat calories you have burned, press the upper button on the left side of the large display until only the word DISTANCE, CALORIES, or FAT CALS appears in the upper section of the large display; make sure that the word SCAN does not appear. To again view the distance you have pedaled and the numbers of calories and fat calories you have burned, press the upper button until the word SCAN reappears. The center of the large display will show the elapsed time and your current pace (pace is shown in minutes per mile in this section of the large display). The display will change from one number to the other every few seconds. Note: When a program is selected, the display will show the time remaining in the program instead of the elapsed time. To view only the elapsed time or your pace, press Center Button the center button on the left side of the large display until only the word TIME or PACE appears; make sure that the word SCAN does not appear. To again view both the elapsed time and your pace, press the center button until the word SCAN reappears. 12