ProForm C830 Elliptical English Manual - Page 5

ASSEMBLY Assembly requires two persons. Place all parts of the elliptical crosstrainer in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the included allen wrenches, assembly requires a phillips screwdriver , an adjustable wrench , and a rubber mallet . Refer to the drawings below to identify the small parts needed for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST on page 22. The number following the key number is the quantity needed for assembly. Note: Some small parts may have been pre-assembled. If a part is not found in the parts bag, check to see if it has been pre-assembled. M6 Large Washer (94)-2 M8.5 Small Washer (45)-2 M8.5 Washer (53)-4 M10 Split Washer (70)-1 Wave Washer (116)-2 M10 Nylon Locknut (106)-4 M4 x 16mm Screw (66)-4 M4 x 22mm Screw (93)-2 M6 x 16mm Button Screw (109)-2 M6 x 45mm Flat Screw (20)-4 M8 x 19mm Patch Screw (108)-4 M8 x 25mm Patch Screw (22)-2 M10 x 112mm Carriage Bolt (34)-4 M10 x 85mm Button Screw (63)-1 5