ProForm Crosswalk 3.0 Xt Treadmill English Manual - Page 9
Handrails 40. Attach the Handrail to the Right
View all ProForm Crosswalk 3.0 Xt Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
7. Gently pull the Upright Wire (69) to remove any excess from the Right Upright (39). 7 69 39 8. Route the Upright Wire (69) through one of the Handrails (40). Attach the Handrail to the Right Upright (39) with two Handrail Bolts (9) and two Handrail Star Washers (11). Be careful not to pinch the Upright Wire. Attach the other Handrail (40) to the Left Upright (38) with two Handrail Bolts (9) and two Handrail Star Washers (11). Firmly tighten the Handrail Bolts. Remove the tie from the Upright Wire (69). 8 9 11 40 69 38 9 11 40 Tie 39 9. Have another person hold the Console Base (67) near the right Handrail (40). Attach the 9 ground wire on the Console Base to the right Handrail with a No. 8 x 3/4" Screw (10). Connect the wire harness on the Console Base (67) to the Upright Wire (69) as shown in the inset drawing. Important: If the connectors are oriented correctly, they will slide together easily and snap into place. If the connectors are not oriented correctly, the console may be damaged when the power is turned on. Wire Harness 69 67 10 Ground Wire 40 69 9