ProForm Crosswalk Fit 415 Treadmill English Manual - Page 18
How To Use A Preset Workout
View all ProForm Crosswalk Fit 415 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
HOW TO USE A PRESET WORKOUT 1. Insert the key into the console. See HOW TO TURN ON THE POWER on page 16. ash. If a different speed and/or incline setting is programmed for the next segment, the speed and/ or incline setting will ash in the display to alert you. The treadmill will then automatically adjust to the speed and incline settings for the next segment. 2. Select a preset workout. To select a preset workout, press the Weight Loss Workouts button or the Cross Train button repeatedly until the desired workout appears in the display. When you select a workout, the maximum speed and incline settings of the workout will ash in the displays for a few seconds; then the display will show how long the workout will last. A prole of the speed settings of the workout will scroll across the matrix. 3. Start the walking belt. Press the Start button or the Speed increase button to start the workout. A moment after you press the button, the treadmill will automatically adjust to the rst speed and incline settings for the workout. Hold the handrails and begin walking. Each workout is divided into 30 one-minute segments. One speed setting and one incline setting are programmed for each segment. Note: The same speed and incline settings may be programmed for consecutive segments. During the workout, the prole will show your Current Segment progress. The ashing segment of the prole represents the current segment of the workout. The height of the ash- ing segment indicates the speed setting for the current segment. At the end of each segment, a series of tones will sound and the next segment of the prole will begin to The workout will continue in this way until the last segment of the prole ashes in the display and the last segment ends. The walking belt will then slow to a stop. If the speed or incline setting for the current segment is too high or too low, you can manually override the setting by pressing the Speed and Incline buttons; however, when the current segment of the workout ends, the treadmill will automatically adjust to the speed and incline settings for the next segment. To stop the workout at any time, press the Stop button. To restart the workout, press the Start button or the Speed increase button. The walking belt will begin to move at 1 mph. When the next segment of the workout begins, the treadmill will automatically adjust to the speed and incline settings for that segment. 4. Follow your progress with the displays. See step 5 on page 17. 5. Measure your heart rate if desired. See step 6 on page 17. 6. When you are nished exercising, remove the key from the console. See step 7 on page 17. 18