ProForm Crosswalk Fit 415 Treadmill English Manual - Page 9

Be careful not to pinch the Upright

Page 9 highlights

5. Hold the Right Upright (76) against the Base (74). Be careful not to pinch the Upright 5 Wire (63). Insert a 3/8" x 3 1/4" Screw (2) with a 3/8" Star Washer (3) into the top hole in the Right Upright (76). Then, partially tighten the Screw into the Base (74). Partially tighten two more 3/8" x 3 1/4" Screws (2) with two 3/8" Star Washers (3) into the Right Upright (76) and the Base (74); do not fully tighten the Screws yet. Attach the Left Upright (not shown) in the same way. Note: There are no wires on the left side. 76 3 63 2 74 3 6. Identify the Left and Right Handrails (59, 64). (Note: The Right Handrail has a large hole in its side.) Insert the Console Frame (7) into the ends of the Left and Right Handrails. Note: The nut inserts (C) should be on the bottom. Tighten two 1/4" x 1 1/4" Screws (77) with two 1/4" External Star Washers (61) into each Handrail (59, 64) and into the Console Frame (7); do not fully tighten the Screws yet. 6 77 61 59 7 C 77 61 C Hole 64 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

9
5.
Hold the Right Upright (76) against the Base
(74).
Be careful not to pinch the Upright
Wire (63).
Insert a 3/8" x 3 1/4" Screw (2) with a 3/8" Star
Washer (3) into the top hole in the Right Upright
(76). Then, partially tighten the Screw into the
Base (74).
Partially tighten two more 3/8" x 3 1/4" Screws
(2) with two 3/8" Star Washers (3) into the Right
Upright (76) and the Base (74);
do not fully
tighten the Screws yet.
Attach the Left Upright (not shown) in the
same way.
Note: There are no wires on the left
side.
3
76
3
2
74
63
5
6.
Identify the Left and Right Handrails (59, 64).
(Note: The Right Handrail has a large hole in
its side.)
Insert the Console Frame (7) into the
ends of the Left and Right Handrails.
Note: The
nut inserts (C) should be on the bottom.
Tighten two 1/4" x 1 1/4" Screws (77) with
two 1/4" External Star Washers (61) into each
Handrail (59, 64) and into the Console Frame
(7);
do not fully tighten the Screws yet.
7
77
6
61
77
61
C
C
Hole
59
64