ProForm Fusion 6.0 Lx English Manual - Page 25
Attaching The Curl Pad
![]() |
View all ProForm Fusion 6.0 Lx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
ADJUSTING THE BACKREST To adjust the position of the left Backrest (35), first loosen the indicated Adjustment Knob (69) and disengage it from the Backrest Frame (19). Next, move the Backrest to the desired position. Reengage the Knob into the Backrest Frame and retighten the Knob into the Left Upright (8). Make sure the Knob is fully tightened. ADJUSTING THE SEATS To adjust the position of the Small Seat (37), loosen the indicated Adjustment Knob (69) and disengage it from the Right Seat Frame (17). Next, move the Seat to the desired position. Reengage the Knob into the Seat Frame and retighten the Knob into the Right Seat Upright (11). Make sure the Knob is fully tightened. The Large Seat (not shown) can be adjusted in the same manner. ATTACHING THE CURL PAD Insert the Curl Post (16) into the Curl Post Upright (10) and secure it at the desired height with an Adjustment Knob (69). Remove the Curl Pad (38) from the weight system when performing an exercise that does not require it. 35 69 19 8 37 69 17 11 38 16 69 LOCKING THE WEIGHT STACK Lock a weight stack by inserting a Lock Pin (78) through a Weight Guide (30) and securing the Lock (77) onto the Lock Pin. 10 30 77 78 25
![](/manual_guide/products/proform-fusion-60-lx-english-manual-7984047/25.png)