ProForm Hiit L6 Instruction Manual - Page 9
See the upper drawing.
View all ProForm Hiit L6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
6. See the upper drawing. With the help of a second person, orient the Console (5), the Console Cover (7), and the Console Bracket (4) as shown. Then, route the wire (A) on the Console through the Console Cover and the Console Bracket. 6 5 See the lower drawing. Tip: Avoid pinching the wire (A). Attach the Console (5) and the Console Cover (7) to the Console Bracket (4) with four M4 x 22mm Screws (107); start all the Screws, and then tighten them. 5 A7 4 7 Avoid pinching the wire (A) 4 A 7. While a second person holds the Console Bracket (4) near the Frame (1), connect 7 the wire (A) on the Console (5) to the Main Wire (115). Tip: Avoid pinching the wires. Attach the Console Bracket (4) to the Frame (1) with two M8 x 86mm Screws (109) and two M8 x 15mm Screws (96); start all the Screws, and then tighten them. 107 4 96 1 5 Avoid pinching A the wires 115 109 96 9