ProForm Hse 700 Elliptical English Manual - Page 8
M6 x 16mm Screws 54 and two M6 Black Nylon
 |
View all ProForm Hse 700 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
6. Attach the T-Handle (10) to the Upright (3) with two 6 M6 x 16mm Screws (54) and two M6 Black Nylon Locknuts (55). 3 7. The Console (6) requires two "AA" batteries (not included). Alkaline batteries are recommended. 7 To install batteries, first locate the battery clip under the Console (6). Insert two batteries into the battery clip as shown. Make sure that the batteries are turned so the negative ends of the batteries (marked "-") are touching the springs in the battery clip. Battery Clip 54 10 55 6 Batteries 8. Make sure that all parts of the HSE700 are properly tightened. Place a mat under the HSE700 to protect the floor or carpet from damage. 8
-
1 -
2
-
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14
-
15
-
16
 |
 |
8
7.
The Console (6) requires two “AA” batteries (not
included). Alkaline batteries are recommended.
To install batteries, first locate the battery clip under
the Console (6). Insert two batteries into the battery
clip as shown.
Make sure that the batteries are
turned so the negative ends of the batteries
(marked “–”) are touching the springs in the
battery clip.
8.
Make sure that all parts of the HSE700 are properly tightened.
Place a mat under the HSE700 to protect
the floor or carpet from damage.
6
7
6
55
54
10
3
Batteries
Battery
Clip
6.
Attach the T-Handle (10) to the Upright (3) with two
M6 x 16mm Screws (54) and two M6 Black Nylon
Locknuts (55).