ProForm Performance 1450 Treadmill English Manual - Page 13
the #10 x 3/4 Flat Head Screws 64.
View all ProForm Performance 1450 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
9. Set the console assembly face down on a soft surface to avoid scratching the console 9 assembly. Remove all the screws (C) attaching the Crossbar (93). Next, lift off the Crossbar. Discard the screws. Console Assembly C 93 10. IMPORTANT: To avoid damaging the Crossbar (93), do not use power tools and do 10 not overtighten the #10 x 3/4" Screws (9) or the #10 x 3/4" Flat Head Screws (64). Orient the Crossbar (93) as shown. Attach the Crossbar to the Handrails (87, 88) with two #10 x 3/4" Flat Head Screws (64), two #10 x 3/4" Screws (9), and two 1/4" Star Washers (35) as shown. Start all four Screws, and then tighten them. 93 9 64 35 88 9 64 35 87 13
13
9.
Set the console assembly face down on a soft
surface to avoid scratching the console
assembly.
Remove all the screws (C) attaching the
Crossbar (93). Next, lift off the Crossbar. Discard
the screws.
93
Console
Assembly
C
9
10.
IMPORTANT: To avoid damaging the
Crossbar (93), do not use power tools and do
not overtighten the #10 x 3/4" Screws (9) or
the #10 x 3/4" Flat Head Screws (64).
Orient the Crossbar (93) as shown. Attach the
Crossbar to the Handrails (87, 88) with two #10
x 3/4" Flat Head Screws (64), two #10 x 3/4"
Screws (9), and two 1/4" Star Washers (35) as
shown.
Start all four Screws, and then tighten
them.
93
88
9
10
9
87
35
64
64
35