ProForm Performance 1450 Treadmill English Manual - Page 14
If You Do Not Connect The Con
View all ProForm Performance 1450 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
11. With the help of a second person, hold the console assembly near the Left Handrail (88). Connect the Upright Wire (81) to the console wire. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Remove the wire tie from the Upright Wire. 11 Console Wire 81 Console Assembly Console Wire 81 Wire Tie 88 12. Set the console assembly on the Right Handrail (87) and the Left Handrail (88). Be careful not 12 to pinch any wires. Insert the excess Upright Wire (not shown) into the Left Handrail. Attach the console assembly with six #8 x 1/2" Screws (1) and four 1/4" x 1/2" Screws (36) with four 5/16" Flat Washers (100) and four 1/4" Star Washers (35) as shown. Start all ten Screws, 35 and then tighten them. 100 See step 8. Tighten the four 5/16" x 1" Screws (5) and the two 5/16" x 1 1/4" Bolts (4). 36 Console Assembly 87 88 35 1 1 1 100 36 1 13. Tighten the four 3/8" x 2 3/4" Screws (7). Next, tighten the four 3/8" x 1 1/4" Screws (8) (only 13 one side is shown). 83 Press the Left Base Cover (82) and the Right Base Cover (83) onto the Base (94) until they snap into place. 7 8 14 94 82