ProForm Performance 600 Treadmill English Manual - Page 10

8. Set the console assembly face down on a soft 8 surface to avoid scratching the console assembly. Remove the two Screws (A). Next, lift off the A Crossbar (93). Discard the two Screws. Console Assembly A 93 9. IMPORTANT: To avoid damaging the 9 Crossbar (93), do not use power tools and do not overtighten the #10 x 3/4" Screws (9) or the #10 x 3/4" Flat Head Screws (112). Orient the Crossbar (93) as shown. Attach the Crossbar to the Handrails (87, 88) with two #10 x 3/4" Flat Head Screws (112), two #10 x 3/4" Screws (9), and two 1/4" Star Washers (35) as shown. Start all four Screws, and then tighten each of them. 112 93 9 35 88 9 112 35 87 10. With the help of a second person, hold the console assembly near the Left Handrail (88). 10 Connect the Upright Wire (81) to the console wire. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Remove the wire tie from the Upright Wire. Console Wire 81 10 Console Assembly Console Wire 81 Wire Tie 88