ProForm Performance 600 Treadmill English Manual - Page 13

16. Make sure that there is a piece of cardboard below the rear of the Frame (56). 16 IMPORTANT: See page 15 and plug in the power cord. Next, see page 17 and turn on the power. Then, press the Incline increase button once. When the Frame (56) stops moving, remove the key from the console and unplug the power cord. 56 IMPORTANT: Make sure to follow all instructions in this step Cardboard 17. IMPORTANT: Before you begin this step, 17 make sure that you have read and followed all the instructions in step 16. Next, raise the Frame (56) to the position shown. Have a second person hold the Frame until this step is completed. Orient the Storage Latch (53) so that the large barrel and the latch knob are oriented as shown. Attach the upper end of the Storage Latch (53) to the bracket on the Frame (56) with a 3/8" x 1 3/4" Bolt (6) and a 3/8" Nut (12). Attach the lower end of the Storage Latch (53) to the Base (94) with a 3/8" x 2" Bolt (3) and a 3/8" Nut (12). Note: It may be necessary to move the Frame (56) back and forth to align the Storage Latch with the Base. 56 12 6 53 Latch Knob Large Barrel 94 12 3 13