ProForm Performance 600 Treadmill English Manual - Page 7
Pull the Upright Wire 81 and the Base Ground
![]() |
View all ProForm Performance 600 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
1. Make sure that the power cord is unplugged. 1 Place a piece of cardboard below the rear of the Frame (56) to protect the floor or carpet. Attach the Left Wheel Cap (96) to the Base (94) with two #8 x 3/4" Screws (2). Attach the Right Wheel Cap (not shown) to the right side of the Base (94) in the same way. 2. Pull the Upright Wire (81) and the Base Ground Wire (110) through the indicated hole in the 2 Base (94). Attach the Base Ground Wire (110) to the Base (94) with a #8 x 1/2" Ground Screw (10). Press the Grommet (77) into the square hole in the Base (94). 94 2 56 96 Cardboard Hole 77 81 110 10 94 3. Identify the Left Upright (89), which is marked with a "Left" sticker or an "L" sticker. Have a sec- 3 ond person hold the Left Upright near the Base (94). See the inset drawing. Tie the wire tie in the Left Upright (89) securely around the end of the Upright Wire (81). Then, pull the other end of the wire tie until the Upright Wire is routed completely through the Left Upright. 89 81 89 Wire Tie Wire Tie 81 81 94 7
![](/manual_guide/products/proform-performance-600-treadmill-english-manual-2f281ec/7.png)