ProForm Power Zt8 Treadmill English Manual - Page 27
Check Wifi Status
View all ProForm Power Zt8 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
DEMO-The console features a display demo mode, designed to be used if the treadmill is displayed in a store. While the demo mode is turned on, the console will function normally when you plug in the power cord, press the power switch into the reset position, and insert the key into the console. However, when you remove the key, the displays will remain lit, although the buttons will not function. If the demo mode is turned on, the word ON will appear in the matrix. To turn on or turn off the demo mode, press the Enter button. CONTRAST LVL-Press the Incline increase and decrease buttons to adjust the contrast level of the display. If a module is connected, you may also select the following screen: TRAINER VOICE-To turn on or turn off the audio coach, press the Enter button. If an iFit module is connected, you may also select the following screens: DEFAULT MENU-The default menu will appear when you insert the key into the console or when you press the Home button. Press the Enter button repeatedly to select the manual main screen or the iFit screen as the default menu. CHECK WIFI STATUS-Press the Enter button to check the status of your iFit module. The lower display will show the software version number, the network SSID, the network encryption type, the connection status, the wireless signal strength, the IP address of the module, the number of registered users and their names, the results of the DNS lookup, and the status of the iFit server. SEND/RECEIVE DATA-To send and receive workouts, workout logs, and updates, press the Enter button. When the process is nished, the words TRANSFERS DONE will appear in the display. 3. Exit the settings mode. To exit the settings mode, press the Settings button. 27