ProForm Spacesaver 600 Elliptical English Manual - Page 10

10. Apply a small amount of grease to the axle on the Right Upper Body Leg (72) and to a Large 10 Wave Washer (89). 24 Slide an Upper Body Leg Spacer (9) onto the Right Upper Body Leg (72); make sure that the flat side of the Upper Body Leg Spacer is facing outward. Then, slide the Large Wave Washer (89) and the right Pedal Arm (32) onto Right Upper Body Leg. Attach the right Pedal Arm (32) with an M8 x 23mm Patch Shoulder Screw (103), an Axle Cover (66), and an M8 x 23mm x 1mm Washer (102). Repeat this step for the other side of the elliptical exerciser. 11. Apply a small amount of grease to an M8 x 11 58mm Shoulder Bolt (88) and to the right Link Arm Bracket (45). Insert the right Link Arm (30) into the right Link Arm Bracket (45). Attach the Link Arm with the M8 x 58mm Shoulder Bolt (88), an M8 x 23mm x 2mm Washer (31), and an M8 Nylon Locknut (84). Tighten an Adjustment Knob (52) onto the right Adjustment Pin (76). Repeat this step for the other side of the elliptical exerciser. 72 Grease 9 89 32 66 102 103 30 88 45 31 84 Grease 76 52 10