ProForm Spacesaver 600 Elliptical English Manual - Page 9

8. Apply a generous amount of the included grease to the Upper Body Axle (71). Insert the Upper Body Axle into the Upright (10). Be careful not to damage the Upper Wire Harness (65). Apply a small amount of grease to a Wave Washer (80) and to an M8 x 23mm x 1mm Washer (102). Slide the Wave Washer onto the left end of the Upper Body Axle (71). Identify the Left Upper Body Leg (24), which is marked with an "L" sticker, and orient it as shown. Slide the Left Upper Body Leg onto the left side of the Upper Body Axle (71). Attach the Left Upper Body Leg (24) to the Upper Body Axle (71) with an M8 x 23mm Patch Shoulder Screw (103), an Outer Upper Body Cover (26), and an M8 x 23mm x 1mm Washer (102). Repeat this step for the Right Upper Body Leg (72). 8 103 26 102 Grease 24 65 80 71 10 80 102 26 103 Grease 72 9. Identify the Right Pedal (35), which is marked 9 with an "R" sticker. Orient the Right Pedal and a Pedal Arm (32) as shown. Attach the Right Pedal (35) to the Pedal Arm (32) with three M8 x 45mm Button Screws (90), three M8 Split Washers (97), and three M8 x 23mm x 2mm Washers (31). Repeat this step to attach the Left Pedal (not shown) to the other Pedal Leg (not shown). 35 31 97 90 32 31 97 9