ProForm Spacesaver 930 Elliptical English Manual - Page 9
and the Right Front Upper Body Cover 29
View all ProForm Spacesaver 930 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
8. Hold the Left Rear Upper Body Cover (26) and the Left Front Upper Body Cover (27) around the Left Upper Body Leg (24). Attach the Upper Body Covers with five M4 x 16mm Round Head Screws (80). Attach the Right Rear Upper Body Cover (28) and the Right Front Upper Body Cover (29) in the same way. 8 80 80 27 24 29 28 26 80 9. The Console (11) requires four 1.5V "D" batteries (not included); alkaline batteries are 9 recommended. Remove the battery cover and insert four batteries into the Console. Make sure that the batteries are oriented as shown at the right. Then, reattach the battery cover. Note: The Console (11) can be operated with an optional power supply instead of batteries. To purchase a power supply, call the toll-free telephone number on the front cover of this manual. Plug one end of the power supply into the jack on the console. Plug the other end of the power supply into an appropriate outlet that is properly installed in accordance with all local codes and ordinances 11 Batteries Battery Cover 10. While another person holds the Console (11) near the Upright (10), connect the console wire harness to the Upper Wire Harness (65). Attach the Console (11) to the Upright (10) with four M4 x 16mm Screws (78). Avoid pinching the wire harnesses during this step. 10 11 Console Wire Harness 10 65 78 Avoid pinching the wire harnesses during this step 9