ProForm Sport 7.0 Treadmill English Manual - Page 16
When You Turn On The Power., The Console May Become Damaged
![]() |
View all ProForm Sport 7.0 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
15. Insert the Upright Wire (81) and the other wire (F) through the two indicated looped ties on the 16 console assembly (G). See the inset drawing. Connect the Upright Wire (81) and the other wire (F) to the console wires. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Insert all excess wires into the console assembly (G). Then, pull the two ties tight against the wires and cut off the ends of the ties. 16. Insert the wire (F) on the left side through the two indicated looped ties on the console assem- 16 bly (G) and make the connection to the wire from the console. Insert all excess wires into the console assembly (G). Then, pull the two ties tight against the wires and cut off the ends of the ties. G Ties Console 81 Wire F Console Wires 81 F G Ties F 16
![](/manual_guide/products/proform-sport-70-treadmill-english-manual-b5bd415/16.png)