ProForm Sport 7.0 Treadmill English Manual - Page 19

21. Note: If you purchased the optional iFit module (see page 26), follow the instructions included 21 with the iFit module to insert the iFit module into the console assembly (G) before you attach the Tablet Holder (98). Attach the Tablet Holder (98) to the back of the console assembly (G) with four #8 x 1/2" Machine Screws (8); start all four Machine Screws, and then tighten them. Be careful not to overtighten the Machine Screws. G 8 98 8 22. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. To avoid damage to the console, keep the treadmill out of direct sunlight. Keep the included hex keys in a secure place; one of the hex keys is used to adjust the walking belt (see pages 32 and 33). Note: Extra parts may be included. 19