ProForm Ze3 Elliptical English Manual - Page 22
How To Adjust The Reed Switch
![]() |
View all ProForm Ze3 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
HOW TO ADJUST THE REED SWITCH If the console does not display correct feedback, the reed switch should be adjusted. To adjust the reed switch, you must remove the right disc cover and the right pedal disc. Using a flat screwdriver, remove the right Disc Cover (18). Locate the Reed Switch (58). Loosen, but do not remove, the M4 x 16mm Screw (92). 49 30 27 81 18 92 41 58 24 Next, remove the M8 x 12mm Screws (81) from the Right Pedal Disc (27), Then, see EXPLODED DRAWING A on page 26 and remove the Pedal Arm Cap (30), the M8 x 18mm Hex Screw (85), and the M8 Washer (33) from the Right Pedal Arm (49). Next, rotate the Crank Assembly (24) until a Magnet (41) is aligned with the Reed Switch (58). Slide the Reed Switch slightly toward or away from the Magnet. Then, retighten the M4 x 16mm Screw (92). Rotate the Crank Assembly (24) for a moment. Repeat these actions until the console displays correct feedback. When the reed switch is correctly adjusted, reattach the right pedal disc and the right disc cover. 22
![](/manual_guide/products/proform-ze3-elliptical-english-manual-d877eb5/22.png)