ProForm Ze3 Elliptical English Manual - Page 6
Tip: Start both Patch Screws before, tightening them., To make assembly easier, read the infor,
View all ProForm Ze3 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
1. To make assembly easier, read the infor- 1 mation on page 5 before you begin. While a second person lifts the rear of the Frame (1), attach the Rear Stabilizer (70) to the Frame with two M10 x 85mm Patch Screws (82). Tip: Start both Patch Screws before tightening them. 70 1 82 2. Orient the Front Stabilizer (73) so that the 2 "Front" sticker is facing away from the front of the Frame (1). While a second person lifts the front of the Frame (1), attach the Front Stabilizer (73) to the Frame with two M10 x 85mm Patch Screws (82). 73 82 1 6
6
1.
While a second person lifts the rear of the
Frame (1), attach the Rear Stabilizer (70) to the
Frame with two M10 x 85mm Patch Screws
(82).
Tip: Start both Patch Screws before
tightening them.
2.
Orient the Front Stabilizer (73) so that the
“Front” sticker is facing away from the front of
the Frame (1).
While a second person lifts the front of the
Frame (1), attach the Front Stabilizer (73) to the
Frame with two M10 x 85mm Patch Screws
(82).
70
82
1
1
2
1
To make assembly easier, read the infor-
mation on page 5 before you begin.
82
73