Pyle PEXA8000 PEXA3000 Manual 1 - Page 2

PEXA SERIES Generic Fault And Solutions FAULT No sound (power LED off) PROBLEM AC supply not connected or switched off Blown fuse NO sound (Power LED on) No input, or input too low Level controls set too low SOLUTIONS Check AC connections and switches Check and replace fuses at plug and IEC socket. USE ONLY SAME TYPE AND RATING! Check input is connected, and LED Increase level controls Speakers faulty or not connected Check speakers and speaker connections Hum or buzz is audible Distortion is audible Sound cuts out or is I ntermittent Noise from AC supply is being picked up in the signal path There is an earth problem Excessive signal level somewhere in signal chain. Damaged or poor quality cables Damaged or poor quality cables or connectors,connectors not properly inserted, amp overheating Use good quality, shielded signal cables and ensure they are kept away from AC power cables and other AC powered equipment Use a mains tester to ensure the AC outlet has a good earth. Power connected equipment(e.g mixer and amp) from the same AC outlet where possible. Use the LED to ensure the AC outlet has a good earth. Power connected equipment from the same AC outlet where possible Use only high quality cables of the appropriate type, protect them from damage and regularly check connections. Check all cables and connections, refer to above sections regarding distortion and temp warning light Service All PYLE PRO products are thoroughly examined and tested before leaving the factory, and if used correctly will give you many years of excellent service. However, if a problem arises, proceed as follows: (A) contact the retailer from whom the unit was purchased and describe the symtoms of the fault. (B) if the retailer connot help, return the equipment to the national distributor for your country. Use the original packaging to protect the product from damage. Include a note with the equipment stating your name and address, details of the problems, date code and date and place of purchase. Page 8 PEXA SERIES Table of Contents Overview 2 Important Safety Instructions 2 Front Panel 3 Rear Panel 4 Installation guidelines 5 Graphic LCD Display Screen Explain 6 Technical Specifications 7 Generic Fault And Solutions 8 Service 8 Page 1