Pyle PKWK43 Instruction Manual - Page 4
Control Panel, Using The Thermo Pot For The First Time, Remove And Attach The Lid
![]() |
View all Pyle PKWK43 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
CONTROL PANEL USING THE THERMO POT FOR THE FIRST TIME 1. Wash and rinse water tank with water. 2. Fill water up to full mark. 3. Boil once and discard the water by pumping it out. REMOVE AND ATTACH THE LID Detach Lid Place the handle towards the rear side of the thermo pot. Then open the lid by pulling up the lid opening lever (caution: be careful of the steam from the steam vent). Position the lid at 45 degree and pull out the lid from the hinge holder by pressing the hinge lock. Note: Never remove the lid while the water is boiling. Attach Lid Place the handle towards the rear side of the thermo pot. Press the hinge lock, at the same time insert the shaft of the hinge of the lid into the hinge holder. Ensure that the lid is attached properly and close the lid until it clicks. www.NutrichefKitchen.com 4
![](/manual_guide/products/pyle-pkwk43-instruction-manual-773e5c8/4.png)