Pyle PKWK43 Instruction Manual - Page 5
Operating The Appliance
View all Pyle PKWK43 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
OPERATING THE APPLIANCE To open the lid and boil water Pull the lid opening lever up to open the lid and fill water into the water tank. • Always fill water above the minimum water level mark and below the maximum water level mark. • Refer to the water level mark in the water tank. To close the lid Close the lid by pressing down until it clicks 1. Insert the receptacle into the power inlet. 2. Then, insert the plug to the wall outlet. WARNING: Do not power on the appliance if the water tank is empty. • Do not close the lid by force. • Connect the plug to the power inlet horizontally. 1. "Boil" indicator light will be on during boiling process. BOIL KEEP WARM 2. It will switch to "keep warm" automatically after the water is boiled. BOIL KEEP WARM Pouring hot water 1. Note: The hot water may not dispense smoothly right after boiling. 2. Press on the "DISPENSE" button to dispense hot water. Refill water When water reaches to "refill water" line, add water for automatic re-boil. • Do not open the lid or dispense water while the water is boiling. • Do not contact any parts of your body to the steam vent. • Do not place cloth or any other items to cover the steam vent. • CAUTION: Always keep hands or any parts of your body from the water outlet for a second or two right after you press the dispense button. • Do not press the dispense button when the inner water reservoir is empty. • You cannot dispense hot water by pressing the dispense button, or cup switch if the thermo pot is unplugged. • Do not add water above maximum water level mark. • Boil water below the refill mark may cause malfunction. To re-boil water under keep warm mode • It takes about 3 minutes to re-boil water (with full water tank). • Before re-boiling the water, make sure the water level is above the refill mark. • When adding water into the water tank, be careful the hot steam from the steam vent and water tank. • Once the re-boil button is pressed, the boiling process will begin and you cannot reset any button until it turns to keep warm mode. • Do not press the re-boil button continuously (after re-boiling process) as it may cause malfunction. 5 www.NutrichefKitchen.com