Pyle PLMRA210BT User Guide - Page 3

PLMRA210BT - System Layout PLMRA210BT 1 RCA (Low Level Input) This unit Is provided with RCA Input jacks. Couple the RCA Input with the car stereo or equalizer outputs using RCA type connector cables. 2 Input Gain Control These are NOT Your amplifiers volume controls. They are a sophisticated device which is to be utilized when matching the Input signal of your head unit or equalizer to their amplifier. 3 Bridging Capability Can be bridged to a high power one channel unit. Make sure that you have a speaker or series of speakers on the bridged channel capable of handling at least 200 Watts of RMS power. This unit is provided with terminal inputs. Couple the terminals with a standard car stereo output system wither common Speaker ground to floating ground type originally output to speakers. 4 Connectors The speaker wires of the car stereo should be connected to "L·" (High Level Input) and "R·" terminals respectively. H the car stereo comes out with three wires only, connect the "COMMON" wire to both "L" and "R" input of the amplifier. 5 Power Supply Terminal Connect the + 12V DC power supply Into the terminal by lugs and screws accessible at the panel of this amplifier. Elite Series Waterproof Amplifiers