Pyle PLMRA210BT User Guide - Page 7
Power Connection, Power, Connection
View all Pyle PLMRA210BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Speaker negative terminals on the amplifier are not used in the bridged mode. Bridging is done by using multiple channels of an amplifier to drive a common load. Bridging means that you will use more than one source of power to drive a load (speaker). The sources of power are the independent channels of the amplifier. Some users may automatically set the gain to maximum because they want their music loud, by doing so, they are also increasing the chance of burning out their amplifiers. Please follow the instructions found in this manual to help match the signals correctly. Your system can also become extremely sensitive to noise conditions when you have a high signal level coming Into the amplifier, from your connected source, which should be adjusted accordingly. Avoid problems and match your system levels correctly! Power Connection Power Connection Connect the +12V of the amp to your vehicle's battery (+) Connect the GND of the amp to your vehicle's battery (-), ground properly Users may also reinforce the ground connection by adding another connection of gauged wire from the (-) negative battery terminal to the chassis of the stereo unit. Connect the 'Remote' of the amp to your vehicle's external switch for a positive 12V ON/OFF connection. This may be connected to the receiver power antenna lead (Amp turn on) -- typically blue in color. Visit www.PyleAudio.com for detailed model information and connection ability. Models: PLMRA210BT, PLMRA410BT, PLMRA430BT, PLMRA630BT, PLMRA830BT Elite Series Waterproof Amplifiers