Pyle PLMRB38B Instruction Manual - Page 9

AUXILIARY INPUT OPERATION This receiver is equipped with an external auxiliary input jack (3.5mm) on the front panel which is compatible with audio output from an MP3 music player. Plug such a player into the AUX IN jack with a 3.5mm stereo audio cable and press the MODE button to switch to AUX input mode. "AUX IN" appears in the display.Listen to music from an external device through the speaker. Note: Adjust the volume of the external device to a comfortable level with the receiver volume control. WIRELESS BT STREAMING OPERATION Pair and Connect Prior to using the Wireless BT device as a hands-free system for a Wireless BTenabled mobile phone for the rst time, you must pair and connect the two devices as follows: 1. In any mode, prior to pairing and connecting, the BT logo in the LCD indicating that no device is connected. To begin pairing, enable BT mode on your mobile phone. 2. When the phone nds this ship/car audio system, the "PYLE" name will be displayed. 3. Choose the "PYLE" from the device list to pair and connect with this ship/car audio system. Upon con rming, the BT logo will stop ashing. 4. When pairing is complete, the mobile phone audio will automatically transfer to the ship/car audio system whenever a call is made or received, or when the mobile phone plays music. Make a Call • To make a call, dial the call directly from the paired mobile phone. • To make a call with this Wireless BT hands free system: a. When linking up the Wireless BT-enabled mobile phone to this BT hands-free system, press the button to access the dial telephone number mode, then press the "0~9", * and # button on remote control to input the telephone number, and the entered number will be shown on the LCD display. b. If a number has been incorrectly inputted, press the button to delete it. c. Press the button to make outgoing call. Redial Last Dialed Number • Press and hold the button on the control panel to redial the last dialed phone number www.PyleUSA.com 9