Pyle PTA1 PTA1 Manual 1 - Page 6

Trouble Shooting

Get Pyle PTA1 PDF manuals and user guides View all Pyle PTA1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 6 highlights

Connecting two 4-8 ohm speakers in stereo mode. Connecting four 8 ohm speakers in stereo mode. TROUBLE SHOOTING No power The fuse might be blown. Check the amplifier's fuse and replace it if necessary. No sound Sound source or speakers not connected properly. Check all connections. MUSIC volume control set to minimum. Adjust the volume control to desired setting. The speaker's wire might be the wrong impedance. Make sure all connected speakers have the same impedance rating. The amplifier might has shut down. Turn the amplifier off and let it cool. Make sure the amplifier is properly ventilated, and then turn it back on. Feedback Microphone or speakers are too close together. Reposition the microphones and speakers. 4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
4
The fuse might be blown.
Sound source or speakers
not connected properly.
MUSIC volume control set
to minimum.
The speaker's wire might be
the wrong impedance.
The amplifier might has
shut down.
Microphone or speakers are
too close together.
Check the amplifier's fuse
and replace it if necessary.
Check all connections.
Adjust the volume control
to desired setting.
Make sure all connected
speakers have the same
impedance rating.
Turn the amplifier off and
let it cool. Make sure the
amplifier
is
properly
ventilated, and then turn it
back on.
Reposition the microphones
and speakers.
No power
No sound
Feedback
TROUBLE SHOOTING
Connecting two 4-8 ohm speakers in stereo mode.
Connecting four 8 ohm speakers in stereo mode.