Pyle SLACHT108 Instruction Manual - Page 10

• If the internal vessel is full of water, the display screen will display "FL", and the compressor stops working automatically. After power o , unscrew the water cover, pull out the water plug to drain o water, and it will become normal after being restarted. MAINTENANCE Notice: In order to avoid electric shock, please turn o the A/C and unplug before maintenance or repair. CLEANING • Unplug before cleaning. • Wipe with soft semi-dry cloth. Don't use chemical reagent, such as benzene, alcohol and gasoline etc; otherwise surface of the A/C and even the whole A/C will be damaged. • Prevent water from spattering in the A/C. FILTER SCREEN • Vacuum the lter screen once every two weeks. If it is blocked by dust, e ciency of the A/C will be reduced. • Take out the air inlet grille and pull out the lter screen at both sides according to the direction shown in the following gures. Use vacuum to remove lint from lters. • Put the lter screen into the warm water (about 40°C or 104°F) added with neutral detergent, dry it at a shady place after cleaning. SEASONAL CLEANING If the A/C will not be used for a long time: • Pull out the water plug to drain. • Run the A/C in fan mode for 2H till the inside is dry. • Turn o the A/C and unplug. • Wash the lter screen and reassemble it. • Dismantle the exhaust duct and keep it properly. • Cover the A/C with a plastic bag and place it at a dry place. 10 www.SereneLifeHome.com