RCA 75330 User Guide - Page 3

Table of Contents FCC Information Table of Contents 1 EN First Things First 2 Tools Required 2 Parts Packed with Your Unit 2 Before Mounting 2 Mounting Procedure 3 General Controls 6 Main Unit 6 Side Views 6 In Battery Compartment 6 The Remote Control 7 Display 8 Clock & Timer 8 Setting the Time 8 Setting the Countdown Timer ......... 8 Radio 9 Built-In AFC 9 Antennas 9 Turning On the Radio 9 Turning Off the Radio 9 Adjusting Volume 9 Selecting Radio/TV Band 9 Tuning to a Station/Channel 9 Automatic Station/Channel Search .. 9 Radio Frequency Memory 10 Memory Recall 10 TV Band 10 Using the Weather Band 10 CD Player 11 Selecting CD Player 11 Loading CD Disc 11 Play and Pause Playback 11 Skip and Search Tracks 11 End Playback 11 Repeat and Random Playback ........ 11 Using the Countertop Light ..... 12 Replacing the Bulb 12 Display Brightness 12 Troubleshooting Tips 13 Care and Maintenance 14 Precautions 14 Cleaning the Exterior 14 Handling Compact Discs 14 Cleaning Compact Discs 14 CD Lens Care 14 Limited Warranty 15 1 First Things First Under Cabinet Mounting Instructions Tools Required • Drill and 1/4" Drill Bit • Ruler or Tape Measure • Nail or Awl • Scissors • Screwdriver - Phillips • Countersink (Optional) • Masking Tape • Safety Glasses Parts Packed with your Unit Spacers 3 - 1/4" 3 - 1/2" 3 - 1" 3 - Washers USE: 3 - 2 3/4" Phillips head screws or 3 - 1 5/8" Phillips head screws Before Mounting Empty contents of the selected cabinet under which the unit will be mounted and thoroughly clean the underside of the cabinet to remove any grease residue which might be present. EN We recommend the unit be mounted at the front edge of the cabinet. Important: For secure mounting, the screws must go into the radio to a depth of at least 3/8". If the overall length from the bottom of the cabinet shelf to the bottom of the overhang is more than 1 3/4", then a wood shim will be necessary. A shim can be made from a sheet of plywood, using the Template to locate the central lines for drilling the 1/4" mounting holes. The shim can be located between the cabinet shelf bottom and spacers. Make sure the wood is at least as thick as the excess over 1 3/4" If a shim is necessary, longer screws are required. Longer screws (Type #10-32) are available at most local hardware stores. Cut out the Template on the line indicated. The Template size and screw hole positions are identical to the top of the clock radio. 2 - Cord hooks 1 - Mounting template Cut out on solid black line. Corte sobre la línea sólida negra. Cut out on solid black line. Corte sobre la línea sólida negra. If no overhang, front edge of templet should be even with front edge of cabinet. Si no hay una parte sobresaliente la parte delantera de la plantilla debe ser igual con el borde delantero del cabinete. FRONT Fold guidelines for cabinet with overhang. FRENTE Líneas de guía para ser dobladas en la parte sobresaliente de los gabinetes. Model 2-4290 349A2708-0001 (Rev 0 E/S) 95-10 Printed in Singapore Cut out on solid black line. Corte sobre la línea sólida negra. Cut out on solid black line. Corte sobre la línea sólida negra. 2