RCA 75330 User Guide - Page 8

CD Player Selecting CD Player Press PLAY PAUSE to select CD player. EN Loading CD Disc 1. Press the OPEN CLOSE button to open the disc tray. 2. Insert CD disc with label side facing up. 3. Press OPEN CLOSE again to close the disc tray. Skip and Search Tracks Press TRACK / SEARCH / TUNE previous track. to go to the Press and hold to quick search backwards through a track. Press TRACK / SEARCH / TUNE next track. to go to the Press and hold to quick search forward through a track. Play and Pause Playback Press PLAY PAUSE to start playback. Press again to pause. The track number will flash when in pause mode. Press again to resume. Note: If no disc is in the disc compartment nd will show on the display. End Playback Press STOP to end playback. Repeat and Random Playback Press CD MODE on the remote control repeatedly to select among playback modes. - Repeat track - Repeat disc - Random playback - Repeating all tracks on the disc in random order Using the Countertop Light The countertop light switch is located on the side of the unit, and has three settings: HI, LO, and OFF. DISC PLAYER OFF RADIO CD STOP PLAY/PAUSE TIMER ON/SET OFF er Hz HOUR MINUTE SET kHz TRACK SEARCH REPEAT SHUFFLE EN • For dimmer light, move the light switch to the LO position. • For more illumination, switch to HI. • To turn the light off, place Light switch to OFF. Replacing the Bulb 1. Unplug the unit cord from the AC power outlet. 2. Unlatch the cover to open it. 3. Unscrew and remove the bulb. 4. Install the replacement bulb. 5. Swing the cover up and snap it in place. 6. Plug the cord into the AC outlet. Display Brightness In standby mode, press VOL - or + to select display brightness level (bright (normal) / dim / dimmer) Caution: Use only appliance-type bulb with a maximum of 40-watt or equivalent for replacement. To prevent hazard, do not operate light without the cover. 11 12